622-3-600x380

Twisted Tube™ Heat Exchanger Cleaning

Twisted Tube™ Heat Exchanger Cleaning – Shell and Tube Side

Recognised as a challenging task, Twisted Tube™ Heat Exchanger cleaning is a specialist cleaning challenge which Tube Tech International has frequently solved.

The unusual design of Twisted Tube™ Heat Exchangers means that traditional cleaning techniques such as standard high pressure water jetting and standard chemical cleaning cannot remove all of the deposit gathered within the tube and shell side of the exchangers.

Twisted Tube™ Heat Exchangers generally have 40% higher Heat Transfer contemporary for the same pressure drop as Conventional Shell & Tube Heat Exchangers. Twisted Tubes support themselves, so baffles are not needed. As the tubes are supported by various contact points, decreasing the turbulence results in no dead spots and with faith that fouling will be diminished.

Shell Side Fouling and the Tube Side deposits can be troublesome to eliminate using Traditional High Pressure Water Jetting or Chemicals. These Exchangers accommodate ‘cleaning lanes’. However, the task of cleaning can be laborious if blocked with deposits.

Tube Tech International presents an exceptional cleaning approach for Shell Side Twisted Tube™ Heat Exchanger Cleaning. Tube Tech also uses remote technology that fully progresses through the cleaning lanes and channels, infiltrating the scale and also abolishing all blockages within the Tube Bundles. Twisted Tube™ Heat Exchanger Cleaning on the twisted tube bore is executed by using a technology that expands during cleaning to the diameter and Tube Twist configuration.

Posted in Uncategorized, Services and tagged , , , .